smalllife // packet & bench

Bench layout & VLAN map

Everything sits on one perforated steel shelf in the hallway closet, powered through a small 12 V LiFePO4 DC UPS so short mains blips don't reboot the ONT or lose GNSS lock.

  [ISP Fiber]
       |
  +----+----+          1500/1492 PPPoE
  |  ONT    +-------------------------------+
  +---------+                               | enp1s0
                                     +------+------+
  [North Window Patch] -- PPS/UART --+    gw01     |  N100, passive finned case
  (via ntp01 on VLAN 99)             +------+------+
                                            | enp2s0 (802.1Q trunk: 10,20,99)
                                     +------+------+
                                     |    sw01     |  8x GbE + 2x SFP+ (DAC)
                                     +--+---+----+--+
                                        |   |    |
                    VLAN 10 (work) -----+   |    +----- SFP+ DAC to nas01 (wakes on LAN)
                    VLAN 20 (iot)  ---------+

Address plan

VLANNameIPv4IPv6Notes
10lan10.10.10.0/24PD ::/64 (0x0a)Workstations, laptops, full outbound
20iot10.10.20.0/24ULA fd42:7710:20::/64No WAN egress; NTP & MQTT to local only
99mgmt10.10.99.0/24ULA fd42:7710:99::/64Switch UI, ntp01, rescue access port

Labeling habit

Patch cords get a heat-shrink wrap 3 cm behind each boot: SRC:PORT > DST:PORT printed in 9 pt monospace. Takes five minutes when crimping a cable and saves twenty minutes two years later with a flashlight in your teeth.